DSX2000 Digital Microscope-Suzhou Holy Instrument Co., Ltd.

Upright / Inverted Metallurgical Microscope Tool & Measurement Microscopes Stereo Microscope Scanning Electron Microscope Cutting & Sampling Equipment Metallographic Mounting Equipment Grinding & Polishing Equipment X-ray Inspection Board Surface & Blind Hole Inspection Metallographic Measurement Software

Failure Analysis › Tool & Measurement Microscopes

DSX2000 Digital Microscope

The Evident (Olympus) DSX2000 Digital Microscope offers a wide magnification range of 21X to 7300X, with integrated imaging, measurement, analysis and reporting.

Category: Failure Analysis › Tool & Measurement MicroscopesBrand: OLYMPUS / EVIDENT238 views

Request quote / solution Documents

Product DetailsDETAILS

Product Introduction

The DSX2000 digital microscope series, introduced by Evident (formerly Olympus), simplifies operation and improves efficiency for researchers and quality control laboratories through intelligent tools, integrated imaging, and a customizable interface. The system is equipped with PRECiV DSX software and features a telecentric optical system and fully motorized design, enabling seamless switching from macro inspection to micro inspection. It presents specimen details at a high resolution exceeding 4K, making it suitable for high-resolution observation and inspection applications requiring pass/fail decisions. The series offers three zoom heads: fully motorized (MZH), universal (UZH), and standard (SZH), allowing flexible configuration according to workflow.

Main Technical Specifications

Optical system: telecentric optical system; optical zoom ratio 1X–10X (motorized zoom)
Total magnification: 21X–7300X wide range, enabling both macro and micro inspection in the same system
Objectives: 20 optional objectives, including ultra-long working distance (DSX10-SXLOB series), high-resolution long working distance (DSX10-XLOB series), and UIS2 high-performance series
Objective mounting: SZH/UZH use a manual sliding objective changer (up to 2); MZH uses a motorized nosepiece (up to 4)
Image sensor: 1.1-inch 12.37-megapixel color CMOS, global shutter, Peltier cooling, maximum frame rate 60 fps
High-resolution modes: pixel-shift super mode up to 8192×6000; 3CMOS ultra mode up to 4096×3000; 4K mode 3840×2160
Observation methods (7): BF brightfield, OBQ oblique, DF darkfield, MIX (brightfield + darkfield), PO polarization, DIC differential interference contrast (UZH/MZH), SR shadow relief
Illumination: LED color illumination, darkfield with four-segment ring illumination, service life 60000 hours (design value)
Focus: motorized focus, travel 101 mm (SZH/UZH) / 75 mm (MZH)
Accuracy: XY accuracy ±3%, repeatability 2% (3σn-1); Z-axis repeatability 1 μm (σn-1, 20X and above objectives)
Maximum specimen height: 50 / 115 / 145 mm (depending on objective series), free-angle observation 50 mm
Stage: multiple options including manual stage, motorized rotating XY stage, long-travel motorized XY stage, motorized XY stage with transmitted illumination, and wafer holder
Software: PRECiV DSX (device control, video recording, time-lapse imaging, large panorama image, extended depth of field EDF, 3D acquisition, Z-stack, position list navigation, extended 2D/3D measurement, report tools, neural network processing, macro recorder)
Optional software: counting and measurement, neural network training, materials solutions (grain size, cast iron, phase analysis, porosity, particle size distribution, non-metallic inclusions, layer thickness, coating thickness)
Monitor: 27-inch / 32-inch, Full HD 1920×1080 or 4K 3840×2160
System weight: upright frame 54.7 kg, tilting frame 51.7 kg; power consumption 100–120V / 220–240V, 50/60 Hz
Operating system: Windows 11 (64-bit), reports can be exported to Microsoft 365 / Office 2021

Product Features

Integrated solution: imaging, measurement, analysis, and reporting completed within the same software
Intelligent tools and workflow customization accelerate inspection speed
High-resolution imaging exceeding 4K, making minute defects clearly visible
Motorized zoom and motorized nosepiece enable easy and quick magnification switching

Technical Specifications

Model (zoom head)	DSX20-SZH (Standard), DSX20-UZH (Universal), DSX20-MZH (Motorized)
Optical system	Telecentric optical system
Optical zoom ratio	1X to 10X
Zoom method	Motorized
Nosepiece	Manual sliding (SZH/UZH); motorized revolving (MZH)
Number of objectives	Up to 2 (SZH/UZH); up to 4 (MZH)
Objective options	DSX10-SXLOB, DSX10-XLOB, UIS2 (20 objectives)
Total magnification	20.9X–1461X (SXLOB); 43.8X–5845X (XLOB); 26.1X–7307X (UIS2)
Magnification range	21X – 7,300X
Image sensor	1.1-inch 12.37-megapixel color CMOS, global shutter
Frame rate	60 fps (maximum)
Ultra mode (pixel shift)	6000 × 6000 (1:1); 8192 × 6000 (4:3)
Observation methods	7 methods: BF, OBQ, DF, MIX, PO, DIC, SR
Illumination / lifetime	LED, 60,000 h (design value)
Focusing	Motorized
Focus stroke	101 mm (SZH/UZH); 75 mm (MZH)
Accuracy (X-Y plane)	±3%
Repeatability (X-Y plane)	2% (3σn-1)
Repeatability (Z axis)	1 μm (σn-1)
Max. sample height	50 mm (SXLOB); 115 mm (XLOB); 145 mm (UIS2)
Stage	DSX20-TMTS motorized 100×100 mm; DSX20-RMTS motorized with rotation; DSX20-LMTS motorized 200×100 mm; U-SIC4R manual 100×105 mm
Display	27 in / 32 in; Full HD 1920 × 1080 or 4K 3840 × 2160
Software	PRECiV DSX / PRECiV ADM
Weight (system total)	54.7 kg (upright frame); 51.7 kg (tilt frame)
Power consumption	100–120 V / 220–240 V, 1.1/0.54 A, 50/60 Hz